|
| Troubleshooting | |
|
|
| |
Symptom | Possible Problem | Solution | |
|
|
| |
| The power supply cord isn’t connected to a | Insert the barrel connector from the power supply into the DC connector on | |
| wall outlet and/or the power supply connector | the back of the inMotion system. After this connection is made, insert the | |
| is not plugged into the power supply jack on | power supply into a wall outlet. | |
| the back of the inMotion system. |
| |
The Power LED is not lit |
|
| |
The surge protector (if used) isn’t powered on. | If the power supply cord is plugged into a surge protector, make sure the | ||
(AC Operation) |
| surge protector is switched on. | |
|
|
| |
| The wall outlet is not functioning. | Plug another device into the same wall outlet to confirm the outlet is working. | |
|
|
| |
| The power isn’t turned on. | Turn on the inMotion system by pushing the power button located to the left | |
|
| of the docking station. The LCD screen will turn on. | |
|
|
| |
|
| Press the “+” button to increase the volume to the desired level. | |
| The volume is set too low. |
| |
| Check the volume level on alternate audio source device and set at | ||
|
| ||
|
|
| |
No sound is coming | The Zune player is not correctly seated into | Turn off the Zune player, remove it from the docking station, reseat it, and turn | |
the docking station. | it on again. | ||
from speakers | |||
|
| ||
| If using an alternate audio source, the audio | Follow the instructions in Connecting to an Alternate Audio Source. | |
| source is not properly connected to the | If necessary, try connecting another audio source. | |
| inMotion system or there is a problem with |
| |
| the alternate audio source. |
| |
|
|
|
3