
When you experience problems with settings
Wireless Setting
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection setting again ?
Yes | No |
OK |
|
Display | Check the following |
A conflict with another | ≥ Please wait a few moments, and |
device occurred. | then try again. |
A time out error | ≥ Setting of the Wireless router for |
occurred. | MAC Address etc. |
An authentication | ≥ The signal may be weak. |
error or a time out | ≥ The SSID ( right) and the |
error occurred. | encryption key of the Wireless |
| router. |
| ≥ Please wait a few moments, and |
| then try again. |
A device error | ≥ Contact our Customer Service |
occurred. | Center or your nearest dealer. |
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete. |
| |
1. | LAN cable connection | : Fail |
2. | IP address setting | : Fail |
3. | Connection to gateway | : Fail |
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network connection again. Select “No” and press [OK] to finish Network Easy Setting.
YesNo
OK
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet | : Fail(Error code: B019) |
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of the error and the solution for it.
Press [OK].
OK
Display | Check the following |
Cannot find the server. | ≥ “Primary DNS” and “Secondary |
(Error code: B019) | DNS” Settings of “IP Address / |
| DNS Settings” ( 40) |
Failed to connect to the | ≥ The server may be busy or the |
server. | service may have been |
(Error code: B020) | suspended. Please wait a few |
| moments, and then try again. |
| ≥ Settings of “Proxy Server |
| Settings” ( 40) and the router. |
|
|
≥Refer to the operating instructions of the hub or router.
≥WPS
≥You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. ( 40)
≥ You can redo these settings individually using “Network Settings”. ( 40)
≥Do not use this unit to connect to any wireless network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
≥After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router.
≥Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.
*An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.
Getting started
| Display |
| Check the | |
|
| following | ||
|
|
| ||
1. | LAN cable connection or | :Fail | ≥ Connection of | |
Wireless setting | the LAN | |||
| ||||
2. | IP address setting | :Fail | cables ( 17) | |
3. | Connection to gateway | :Fail |
| |
1. | LAN cable connection or | :Pass | ≥ Connection | |
Wireless setting |
| and settings of | ||
2. | IP address setting | :Fail | the hub and | |
3. | Connection to gateway | :Fail | router | |
≥ Settings of “IP | ||||
1. | LAN cable connection or | :Pass | ||
Address / | ||||
Wireless setting |
| |||
| DNS Settings” | |||
2. | IP address setting | :Pass | ||
( 40) | ||||
3. | Connection to gateway | :Fail |
|
Reprogramming the remote control
If you have more than one Panasonic player/recorder and the remote control operates both products at once, you will need to change the remote control code on one product to prevent this occurrence. ( 40, “Remote Control Code”)
VQT3D27
21