
Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto | Automatically selects the type of picture |
| shown. |
Field | Select if jittering occurs when “Auto” is |
| selected. |
Frame | Select if small text or fine patterns cannot |
| be seen clearly when “Auto” is selected. |
|
|
Seamless Play
The chapter segments in playlists are played seamlessly.
≥Select “On”, when the picture freezes for a moment at the chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement.
Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot decode the respective audio format.
≥Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 26)
≥If “Off” is selected, the unit outputs the primary audio only.
Downmix
Select the downmix system to enjoy
≥Select “Surround encoded” to enjoy the surround sound.
≥There is no downmix effect on the bitstream audio signal.
≥The audio will be output in “Stereo” in the following cases:
–AVCHD playback
–Dolby TrueHD playback
–Playback of secondary audio (including the button click sound).
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for outputting image, it produces clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the Playback menu to “On”. (> 36)
Audio Delay
Speaker
Refer to page 41
Display
Status Messages
Choose whether to show status messages automatically.
Choose the language for menus and
Screen Saver Function
This is to prevent
≥When this is set to “On”:
If there is no operation for 5 minutes or more, DIRECT NAVIGATOR screen switches to HOME menu automatically.
≥While playing and pausing, etc., this function is not available.
≥While playing music
Front Panel Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected, the display is dimmed but brightens when you perform some operations.
Digital Audio Input
Press [OK] to show the following settings:
PCM-FIX
Select the following audio signal to input. jARC
jDIGITAL IN
j[BTT770] [BTT370] HDMI Input1 j[BTT770] [BTT370] HDMI Input2
≥“On”: PCM is available.
≥“Off”: DTS, PCM and Dolby Digital are available. Select “On” if the sound is cut off intermittently.
VQT3D27
License
Information about the software used by this unit is displayed.
38