Altec Lansing IM414V2 manual Troubleshooting, Symptom Possible Problem, Sound is distorted

Page 6

Troubleshooting

Symptom

Possible Problem

Solution

There is a crackling sound coming from speakers

The Zune player is not correctly seated into	Turn off the Zune player, remove it from the docking station, reseat it, and
the docking station.	turn it on again.

If using an alternate audio source, the audio	Follow the instructions in Connecting to an Alternate Audio Source.
source is not properly connected to the	If necessary, try connecting another audio source.
inMotion system or there is a problem with
the alternate audio source.

	If using a PC or laptop, the operating system’s	Check the operating system volume level and decrease it if necessary.
	volume level is set too high.

Sound is distorted	The inMotion system’s volume level is set	Press the “–” button to reduce the volume to the desired level.
Sound is distorted	too high.
	too high.

There is radio interference The unit is too close to a radio tower.		Move the unit to see if the interference goes away.

Intermittent buzzing	The unit is located too close to a GSM	Move the GSM cell phone away from the unit.
Intermittent buzzing	cell phone.
	cell phone.

4

Image 6

Contents IM414v2 Safety Information Important Safety InstructionsPower Box ContentsConnecting Your Zune Player Power OffFM Radio Connecting to an Alternate Audio SourceAdjusting the Volume Surround EffectAC Operation Symptom Possible Problem SolutionPower LED is not lit No sound is comingSound is distorted TroubleshootingSymptom Possible Problem Intermittent buzzingWarranty Altec Lansing ONE-YEAR Limited WarrantySansa and 3 AAA batteries not included