HOW TO USE
As illustrated, set the new roll in so that the tip of thermal paper extends about 20cm (8") from the outlet.
To close the cover, push both ends of it until it locks with a clicking noise. At this time, make sure that the thermal paper has not slipped off the edge.
Cut off the extra thermal paper from the printer outlet.
Replace the recording paper in the following situations
●When a red line appears at the edges of the recording paper. The red line will appear when there is only about one meter (3 feet) or so of recording paper left on the roll.
●When the paper out lamp lights red.
Note:
●Please use only the correct type of recording paper.
●Particular attention must be given to the winding direction of the recording paper, since copying cannot be performed if the winding direction of the recording paper is reversed.
●Be sure to keep the recording paper straight when loading, failure to do so may cause wrinkling or tearing of the paper during the copy function.
*Automatic Power Cut-off Function
If there is no key operation for about an hour, the fluorescent lamp inside the unit automatically shuts off and the machine enters a state of power conservation. (At this time, the power indicator remains lit.)
Once a key is pressed, the fluorescent lamp will light again, and the normal operating condition is restored.
6