HANDLING PRECAUTIONS
6.When replacing the thermal paper, do not place any objects on the open printer cover or apply weight to it.
7.After use, be sure to turn OFF the power switch. In addition, when it is not to be used for a long time, make certain that the plug is pulled form the outlet.
8.Always use the correct type of marker. Be careful not to use other markers as the panel may be damaged or, in some cases, the ink may be difficult to remove.
9.To ensure all information will be printed, leave a slight margin around the edge of the panel as indicated below.
20mm
30mm | 30mm |
20mm
10.When moving this machine, disengage the caster locks, hold both the right and the left sides of the main unit firmly, and avoid any sudden jolts or shocks.
TROUBLE SHOOTING
<PLEASE CHECK THISE SIMPLE POINTS BEFORE REQUESTING SERVICE>
CONDITIONS | CHECKPOINTS |
|
|
When the power fails | Check if the power cord is plugged into |
| outlet. |
When pressing the copy key does not | Check if the paper warning lamp (red) is |
result in copying | lit. |
|
|
Although the printer is functioning, nothing | Check if winding direction of thermal paper |
is copied on the thermal paper | is backwards. (No copy can be is made on |
| the back of thermal paper) |
|
|
When characters written on the panel | If something is written on page 5 by |
cannot be erased even using an eraser | accident, wipe it off with a cloth dampened |
| with neutral detergent. Check if any marker |
| except the correct type has been used to |
| write on pages |
| cloth or neutral detergent. |
|
|
When copy is dirty | Check for ink residue on the panel. If it is |
| stained, wipe off carefully with a soft damp |
| cloth. |
∗If no satisfactory result can be achieved even after the above, contact your dealer or PLUS CORPORATION.
8