Operating the built-in answering device
Activating the answering device
light on /flash
If an SD Memory Card is available(inserted), voice messages will be recorded to the SD Memory Card. (See page 22.)
1Turn the (Auto answer) light on by pressing .
2When receiving a call, a greeting message will be played and the unit will record a voice message.
To record your own greeting message, see page 18.
Listening to recorded messages
Listening to all of the recorded messages
Press | (Playback /Flash) when new messages are |
not recorded. |
|
When new messages are recorded, only the new messages will be played back.
After the messages are played back, the following will be displayed.
すべて消去しますか?
To erase the messages, press (Yes).
To save the messages, press |
| (No). |
| ||
|
|
|
Erasing a specific message
Press (Erase) while listening to the message you
want to erase, then press (Yes).
Erasing all of the recorded messages
When new messages are recorded, the (Auto answer) light will flash.
Press to listen to recorded messages.
1/ 2件
means recorded
1 Press (Function).
2 Press .
3 Press (Set).
すべて消去しますか?
date and time : Friday, Oct. 2, 10:05
If an SD Memory Card is inserted, the following variations may occur:
: Playing a message in the SD Memory Card.
: Playing a message in the main unit that is not saved to any SD Memory Card.
: Playing a message in the main unit that has been saved to an SD Memory Card.
After the messages are played back, the following will be displayed.
To erase the messages, press . 再生した用件を消去しますか?
To save the messages, press .
When not using an SD Memory Card, press (Yes).
When using an SD Memory Card, delete messages as follows:
—To erase the main unit memory messages and the SD Memory Card messages,
Press | (Main unit+SD) | (Yes). |
—To erase the main unit memory messages,
Press (Main unit) (Yes).
—To erase the SD Memory Card messages,
Press (SD card) (Yes).
19