Operating the built-in answering device

F 3

留守電�

Operating the built-in answering device

Activating the answering device

F 1 F 3

留守 �

light on/flash

聞き直し/通話録音�

	スタート/コピー�
留守 �		留守 �
1 Turn the	(Auto answer) light on by pressing	.

2 When receiving a call, a greeting message will be played and the unit will record a voice message.

●To record your own greeting message, see page 16.

Listening to recorded messages

留守 �

When new messages are recorded, the (Auto answer) light will flash.

留守 �

Press to listen to recorded messages.

Listening to all of the recorded messages

聞き直し/通話録音�

Press(Replay/Record).

Erasing a specific message

1 Press	消去�	(Erase) while listening to the message
	F 1

you want to erase.
2 Press	.

Erasing all of the recorded messages

1 Press	留守電
	F 3	(Record).

スタート/コピー�

2 Press (Start), then press .

Erasing your own greeting message

1 Press (Record) and press (Search button) repeatedly until the following is displayed.

自作応答消去

登録録ｱ [ ｽﾀｰﾄ ] 押す

2 Press	スタート/コピー�
2 Press	(Start) and press	.

●The pre-recorded Japanese greeting message will be played when you receive a call.

Operating the answering device from a remote location

留守 �

light on

F 4

ストップ�スタート/コピー�

機能�

Preparation: Programming the remote operation ID

1.Press 機能� (Function).

2.Press (Search button) repeatedly until the

following is displayed.

留守番電話の設定登録録ｱ [ ｽﾀｰﾄ ] 押す

スタート/コピー�

3.Press (Start).

4.Enter any 4-digit number (remote operation ID) except

or #.

登録�

5.Press (Register).

ストップ�

6.Press (Stop).

Operation: Listening to a recorded message from a remote location

	留守 �
Turn the	(Auto answer) light on before you go out.

Remote operations are available only from a touch tone telephone.

1.Call your unit.

2.Enter the remote operation ID during the greeting message.

3. Press 2 or wait 4 seconds.

●Only the new recorded messages will be played

back.

● To listen to all the recorded messages, press 4 after the new messages have been played back.