Using the hand scanner
Operation indicator and warning beep
When scanning documents, check the operation indicator light.
Operation
Indicator
Warning Beep
Green light
Slow flash
No beep
Green light
Fast flash
No beep
Green light
ON
No beep
Situation
The document is being scanned properly. (Fine letter mode)
The document is being scanned properly. (Standard letter mode)
The hand scanner has temporarily stopped during scanning.
You did not move the hand scanner for more than 30 seconds, so it has stopped scanning automatically.
Red light
The hand scanner is being moved quickly.
ON
No beep
(The document is being scanned.)
Red light
The hand scanner is being moved too quickly.
ON
1 beep
(Some parts of the document may not be scanned, or the scanned contents may be too compressed.)
The scanner memory is full.
(The memory indicator green light will flash fast.)
Remedy
To start scanning again,
press 
(Start).
Move it more slowly.
Move it more slowly.
Delete the contents scanned in
the scanner (See page 22).
Light OFF 3 beeps
You have scanned a document that is more than Scan the document as 2 pages or
1.5 m in length as 1 page.more.
Light OFF No beep | The scanner is not in operation. |
Memory indicator
Shows the amount of scanner memory being used.
Memory indicator | Memory used | |
(green light) | ||
| ||
|
| |
OFF | 0% | |
|
| |
ON | ～66% | |
|
| |
Flash slow | ～99% | |
|
| |
Flash fast | 100% | |
|
|
Memory indicator
Operation indicator
19