Automatic dialing on the main unit
Storing names and telephone numbers in the phonebook
Making a voice call using the phonebook
1 Press 
(Phonebook).
2 Press 
(Search button) repeatedly until the desired name is displayed.
3 Lift the handset.
Editing a stored name or number in the phonebook
1 Press 
(Phonebook).
2 Press 
(Set).
“XXX” shows the remaining station numbers you can store.
You can program up to 150 stations, including
4
ﾃﾞﾝﾜﾁｮｳ ｱｷ×××ｹﾝ
1 Press | (Phonebook). |
2 Press | (Search button) repeatedly until the |
desired name is displayed. | |
3 Press | (Intercom/Edit/Character input mode). |
4 Edit the name (see the table on page 8 for instructions).
If you do not need to edit the name, skip to step 5.
3 Enter the name, up to 12 characters (see the table on page 8 for instructions).
4 Press 
(Set).
5 Enter the telephone number, up to 24 digits.
To correct a mistake, press | (Erase). |
6 Press 
(Set).
7 Enter the group number (
to 
).
8 Press 
(Set).
To program other items, repeat steps 3 to 8.
9 Press 
(Stop) to exit the program.
10
5 Press 
(Set).
6 Edit the telephone number.
If you do not need to edit the telephone number, skip to step 7.
7 Press 
(Set).
8Edit the group number.
If you do not need to edit the group number, skip to step 9.
9Press 
(Set).
10Press 
(Stop).