Muratec IF-200 operating instructions Initial Setup

Page 11

IF-200 from Muratec

3.2. Initial Setup

Step 1: Refer to the IF-200 Worksheet in Appendix A of this guide for the required information. Complete the Worksheet under "Settings for your ISP/Mailbox.” Your network system administrator can provide the data required to complete the worksheet. Step 2: After you have completed the IF-200 Worksheet, turn on the IF-200 using the power switch on the rear panel. The LCD screen shows messages. Follow the instructions on the LCD screen and use the keys on the front panel to enter information. After the IF- 200 has been set up, the information remains in memory, even if the power is turned off.

After the power is turned on, the Welcome screen appears after a few seconds.

WELCOME to the world

of IP Fax Mail!

vX.XX

<Press any key>

Connect FAX machine to FAX port on the IF-200

<Press any key>

Print IF-200 worksheet detailing required ISP info?

YESNO

Did worksheet print OK?

YESNO

Press any key to start the setup process.

Make sure your fax machine is connected to the IF-200. Press any key to continue the setup process.

If you have not already completed the Worksheet in the appendix of this guide, press YES to print out a Worksheet.

If the Worksheet is completed, press NO and go to section 3.3, “Entering your ISP and Mailbox Information”.

If you pressed YES above, you see the screen shown to the left. Press YES if the Worksheet printed.* Press NO to try again.

*Using this blank Worksheet or the sample Worksheet in the back of this guide, ask your local LAN or IT administrator to provide the information requested. It will be required in the next section of this Guide to attach the IF-200 to the LAN.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Muratec Copyright Notice Regulatory Information Safety SymbolsRevised January Muratec Office Bridge IF-200 IP Fax System IntroductionTable of Contents Customer Service Before You Begin InstallationConnecting the IF-200 IF-200 from Muratec Control Keys Quick StartFront Panel Controls ButtonsInitial Setup Entering Your ISP and Mailbox Information Gateway IP Address Phone Book From the Main screen, press the Phone Book softkey Sorting a Phone Book Sort Sending a Fax Using The IF-200Using The IF-200 Receiving a Fax Automatic Routing of Fax Messages to Email Adding a Group Phone Book Group Phone BookAdding, Editing or Deleting a Group Viewing a Group Phone BookDeleting a Group Phone Book Editing a Group Phone BookDelete Group entry Are you sure y/n? ISP/Mailbox Information Updating Information After SetupISP/Mailbox Settings and Options Setting Options and DescriptionSetting System SettingsSystem Settings and Options Text sends a user readable format Direct FAXSetting Expert Settings and Options Advanced SettingsExpert Settings Modified Modified Read MMR, Modified Huffman MH Setting Network Statistics Ping NetworkDelete Phone Book Factory Defaults Update FirmwareSend Registration Contacting Muratec Customer Service Customer ServiceAppendix a SpecificationsCertifications IF-200 Worksheet Information Settings for Your Example Needed ISP/MAILBOXIF-200 Menu Chart United States FCC Part Appendix BREN of this device is 0.8B IF-200 Internet Fax Machine Operating Instructions
Top Page Image Contents