Muratec operating instructions Installation, Before You Begin, Connecting the IF-200

Page 8

2. Installation

2.1. Before You Begin

Remove the IF-200 from the box carefully and remove all packing material. Verify that you have the following items:

IF-200 product

AC adapter

Telephone line cord

Category 5 patch cable

Installation Guide and Operation Guide

2.2. Connecting the IF-200

All connections are made on the rear panel of the IF-200. Figure 1 illustrates the real panel of the IF-200.

TEL

FAX

SERIAL

LINE

LAN

12VAC

POWER

LINK

ACTV

1AMP

 

Figure 1. Rear Panel

CAUTION

Make sure the IF-200 power switch is in the OFF position before making any connections. To avoid any danger of shock from the telephone line, connect the telephone line cord to the IF-200 before connecting it to the wall jack. Do not install this equipment during lightning storms.

2.2.1. First Time Setup

1.If you are using an existing fax machine, unplug the telephone line cord from the back of the fax machine (the one that goes to the telephone wall jack). Do not touch the metal contacts on the end of the cord. Now, plug that line cord into the “TEL LINE” jack on the back of the IF-200.

NOTE: If you are installing your fax machine for the first time, plug the telephone line cord that came with your fax machine into the “TEL LINE” jack on the back of the IF-200. Plug the other end of the telephone cord into the RJ-11 telephone wall jack.

7

Image 8
Contents Muratec Copyright Notice Safety Symbols Regulatory InformationRevised January Introduction Muratec Office Bridge IF-200 IP Fax SystemTable of Contents Customer Service Before You Begin InstallationConnecting the IF-200 IF-200 from Muratec Quick Start Front Panel ControlsButtons Control KeysInitial Setup Entering Your ISP and Mailbox Information Gateway IP Address Phone Book From the Main screen, press the Phone Book softkey Sorting a Phone Book Sort Using The IF-200 Sending a FaxUsing The IF-200 Receiving a Fax Automatic Routing of Fax Messages to Email Group Phone Book Adding, Editing or Deleting a GroupViewing a Group Phone Book Adding a Group Phone BookEditing a Group Phone Book Deleting a Group Phone BookDelete Group entry Are you sure y/n? Updating Information After Setup ISP/Mailbox Settings and OptionsSetting Options and Description ISP/Mailbox InformationSetting System SettingsSystem Settings and Options Direct FAX Text sends a user readable formatSetting Expert Settings and Options Advanced SettingsExpert Settings Modified Modified Read MMR, Modified Huffman MH Setting Network Statistics Ping NetworkDelete Phone Book Update Firmware Factory DefaultsSend Registration Customer Service Contacting Muratec Customer ServiceSpecifications Appendix aCertifications Information Settings for Your Example Needed ISP/MAILBOX IF-200 WorksheetIF-200 Menu Chart Appendix B United States FCC PartREN of this device is 0.8B IF-200 Internet Fax Machine Operating Instructions