Oki 4510 manual Fax, Inserting a Document, Sending a fax, Resolution, Reducing

v It is best only to use A4 documents (80 g/m2). Documents smaller than A5 may jam in the ma- chine.

v Do not try to send documents that are

... damp, coated with correction fluid, dirty or have coated surfaces,

... written on in soft pencil, ink, crayon or charcoal,

... taken from newspaper (printer’s ink!),

... held by paper clips or staples; always remove these before faxing,

... wrinkled or torn,

... glued together, too thick or too thin or covered with any adhesive notes ("Post-It®" notes),

... made of foil or continuous paper.

Inserting a

document

1Place the document face down in the document feeder (maximum of 20 sheets).

2Adjust the guides to match the width of the document.

Fax

Sending a fax

1Dial the number.

2To improve the image quality press RESOLUTION.

3Press START/COPY.

Transmission starts. If the fax machine is unable to establish a connection, it will redial automatically after a certain time.

DIf you wish to cancel automatic redial with the document still in the machine, press STOP. The document will be ejected.

DIf you wish to cancel automatic redial without ejecting the document, press MENU, 773 and then START/ COPY. Press START/COPY to confirm.

Resolution

Your fax machine has four different resolutions. In addition to STANDARD (for faxes), there is FINE (for small print and drawings), SUPER FINE (for copies) and PHOTO (for pho- tographs and other such images). Keep pressing RESOLU- TION until the display shows the option you want.

Reducing

To ensure that faxes that are longer than A4 are printed out on one page, you can automatically reduce the page. You can define the extent to which the page is reduced.

Automatic

If this function is activated, an over-long fax is reduced by the amount specified in the function described below (see Limit).

1Press MENU and 334. The display shows 34 RE-

DUCTION.

2Press START/COPY and use uto select AUTO RE-

DUCTION.

3Press START/COPY and use uto select ON or OFF.

4Press START/COPY and then STOP three times to end the function.

Limit

This function lets you select the amount by which an over-long fax is to be reduced.

1Press MENU and 334. The display shows 34 RE-

DUCTION.

2Press START/COPY and use uto select THRESH- OLD.

3Press START/COPY use uto select a value between 0 and 30 mm.

4Press START/COPY and then STOP three times.

17