iRobot Robot owner manual Sending Schedules

Sending Schedules

After setting a cleaning time, you need to send the schedule to Dirt Dog and the scheduling Virtual Walls.

To send a schedule to your Dirt Dog:

1Power on Dirt Dog with the Power button.

2	Open the Scheduler Remote Control’s front cover,
	point the remote at Dirt Dog and press Send All. The
	display will flash to indicate the remote is sending
	the schedule. Dirt Dog will play a song to indicate
	the schedule is received and the Status light will
	begin blinking.
3	Make sure Dirt Dog is on the Home Base or in the
	center of the area you want to clean. Dirt Dog will
	clean at the time you have scheduled.
	Dirt Dog’s Status light will blink amber to indicate
	that Dirt Dog is scheduled to clean.

To accept a schedule, Dirt Dog must either be at least eight feet from the Home Base or charging on the Home Base and Dirt Dog’s power must be on. iRobot Scheduler, Virtual Walls, and Home Base all operate using invisible infrared beams. If used in the same area, Dirt Dog may see multiple infrared signals and not respond to commands. Make sure all Virtual Walls are turned off when using Scheduler.

16iRobot Dirt Dog Owner’s Manual