DETAILED DESCRIPTION & DIRECTIONS
R2-D2 has three major function modes:
1.) COMPANION MODE (Pages
2.) GAME MODE (Page 9)
3.) COMMAND MODE (Pages 10 – 11)
Within each of these modes, there are many functions to explore. This manual will take you through almost all of
Remember to save this manual for as long as you have your R2 unit! The separate "Command Card" is also invaluable as a reminder of the many commands and phrases that help you interact with
COMPANION MODE DIRECTIONS
In this beginning mode,
Stand or sit directly in front of R2 (ideally from about 2 feet, and no more than 6 feet, away), and speak clearly toward the speech sensor on the front of his body. (R2 will indicate that he is listening to you by blinking his red and blue LEDs together.)
Say: "Hey, R2!"
Remember: Always say "Hey, R2!" before giving him a command!
Then, in no particular order, you can communicate with R2 by saying any of the following phrases:
Say: "Don’t move!"
And he’ll remain stationary until you give him another command. (Otherwise, he may start roaming on his own!)
Say: "Go on patrol!"
And he’ll patrol the room for trouble. R2 will beep if he finds someone and wait for a command! If he beeps and no further commands are issued, he’ll keep on patrolling. (Again, be sure to keep him away from stairs during this function!)
Say: "Light beam!"
To turn his front beam on! Say it again to turn it off.
Say: "Play Message!"
And he’ll play a message that is stored in his memory banks from a past mission!
Say: "Be quiet!"
And he’ll execute his commands without beeping or whistling (except for his "yes" or "no" sounds to indicate that he has understood your commands)!
Say: "Speak up!"
And he’ll start talking again!