Altinex VM2144VS, VM2145SS manual Application 5 Setting Jumpers for Video VM2146UX

Page 9

V-MATRIX

Application 5: Setting Jumpers for Video (VM2146UX)

Note: In the diagram above, the jumpers are set for video on the following ports: P8, P9, P11, P10, P16, P17, P18 and P19. For video, set jumper on the top pin and middle pin (pins are dark circles). The jumpers are the dark rectangles on the left side of the diagram next to the bold port numbers.

Image 9

Contents VM2144VS/VM2145SS/VM2146UX Matrix Table of ContentsInstallation Precautions / Safety WarningsCleaning GeneralAbout Your V-MATRIX VIDEO/SYNC Output Cards Technical SpecificationsProduct Description Application Diagram Application 2 Diagram for Sync Signal Matrix Matrix Application 5 Setting Jumpers for Video VM2146UX Matrix Matrix Installing Your V-MATRIX VIDEO/SYNC Output Cards Troubleshooting GuideOperation Limited Warranty Altinex PolicyReturn Policy