Altinex VM2145SS, VM2144VS, VM2146UX manual Matrix

Page 8

V-MATRIX

Application 4: Setting Jumpers for Sync-Negative Polarity (VM2145SS)

Note: In the diagram above, the jumpers are set for negative polarity on the following ports: P7, P4, P6, P5, P13, P12, P15, and P14. For negative polarity, set jumper on the bottom and middle pins (pins are dark circles). The jumpers are the dark areas on the right side of the diagram next to the bold port numbers.

Image 8

Contents VM2144VS/VM2145SS/VM2146UX Table of Contents MatrixPrecautions / Safety Warnings InstallationCleaning GeneralTechnical Specifications About Your V-MATRIX VIDEO/SYNC Output CardsProduct Description Application Diagram Application 2 Diagram for Sync Signal Matrix Matrix Application 5 Setting Jumpers for Video VM2146UX Matrix Matrix Operation Installing Your V-MATRIX VIDEO/SYNC Output CardsTroubleshooting Guide Return Policy Limited WarrantyAltinex Policy