AeroComm ConnexModem Version 2.0 user manual Connecting to a Non-PC Device, Troubleshooting

Page 11
3. Connecting to a Non-PC Device

ConnexModem & ConnexPC User’s Manual

3. Connecting to a Non-PC Device

When using ConnexModem to connect a non-PC device to a phone line, it is important that the ConnexLink unit is configured properly. The ConnexLink unit must match the serial settings of the non-PC host device

To configure the ConnexLink unit, refer to the ConnexLink User’s Manual located on the AeroComm CD or website.

The ConnexModem unit cannot be reconfigured except by AeroComm.

4. Troubleshooting

Please call our toll free technical support number at (800) 492-2320, extension 207. Technical support hours are Monday through Friday, 8:00 am to 5:00 pm Central Standard Time.

5/25/2004

11

Page 10 Page 11
Image 11
Page 10 Page 11
Contents sales@aerocomm.com ConnexModemUser’s Manual Version 10981 EICHER DRIVE LENEXA, KS 66219 800This material is preliminary Limited WarrantyDocument Information Copyright InformationFor CM5124-200-232 and CL5124-200-232 RF Exposure/Installation InstructionsFCC Information FCC NoticeCONNECTING TO A NON-PC DEVICE Table of ContentsWINDOWS MODEM SETUP & CONFIGURATION AUTO-ANSWER FEATURE1.1 ConnexModem & ConnexLink Definitions 2. Windows Modem Setup & Configuration1. Overview ConnexModem & ConnexPC User’s ManualConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual 5/25/2004 ConnexModem & ConnexPC User’s Manual 2.1 Auto-Answer Feature 4. Troubleshooting 3. Connecting to a Non-PC Device
Top Page Image Contents