AeroComm ConnexModem Version 2.0 user manual ConnexModem & ConnexPC User’s Manual, 5/25/2004

Page 9

ConnexModem & ConnexPC User’s Manual

11.Click Advanced… to continue. Select “Use flow control” and then select “Hardware (RTS/CTS)”. Click OK to return to the Standard 56000 bps K56Flex Modem Properties window. Click OK to return to the Modems Properties window. Click Close to complete the configuration.

5/25/2004

Image 9

Contents User’s Manual Version ConnexModem10981 EICHER DRIVE LENEXA, KS 66219 800 sales@aerocomm.comDocument Information Limited WarrantyCopyright Information This material is preliminaryFCC Information RF Exposure/Installation InstructionsFCC Notice For CM5124-200-232 and CL5124-200-232WINDOWS MODEM SETUP & CONFIGURATION Table of ContentsAUTO-ANSWER FEATURE CONNECTING TO A NON-PC DEVICE1. Overview 2. Windows Modem Setup & ConfigurationConnexModem & ConnexPC User’s Manual 1.1 ConnexModem & ConnexLink DefinitionsConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual 5/25/2004 ConnexModem & ConnexPC User’s Manual 2.1 Auto-Answer Feature 4. Troubleshooting 3. Connecting to a Non-PC Device