AeroComm ConnexModem Version 2.0 user manual ConnexModem & ConnexPC User’s Manual

Page 8
Manual background

ConnexModem & ConnexPC User’s Manual

8.You are now ready to configure the new modem. Select “Standard 56000 bps K56Flex Modem” and then click Properties.

9.On the General tab, select the port that is connected to the ConnexLink unit. Select 115200 for the Maximum speed. Do not select “Only connect at this speed”, as this will not allow communications from the ConnexLink unit to the ConnexModem unit. The selected Baud Rate must match the ConnexLink’s Baud Rate setting.

10.Click the Connection tab. Select 8 Data bits, None for Parity, 1 for Stop bits. Select “Wait for dial tone before dialing”. Selecting “Cancel the call if not connected within xx secs” is optional.

5/25/2004

8

Image 8
Contents ConnexModem User’s Manual Version10981 EICHER DRIVE LENEXA, KS 66219 800 sales@aerocomm.comLimited Warranty Document InformationCopyright Information This material is preliminaryRF Exposure/Installation Instructions FCC InformationFCC Notice For CM5124-200-232 and CL5124-200-232Table of Contents WINDOWS MODEM SETUP & CONFIGURATIONAUTO-ANSWER FEATURE CONNECTING TO A NON-PC DEVICE2. Windows Modem Setup & Configuration 1. OverviewConnexModem & ConnexPC User’s Manual 1.1 ConnexModem & ConnexLink DefinitionsConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual ConnexModem & ConnexPC User’s Manual 2.1 Auto-Answer Feature 3. Connecting to a Non-PC Device 4. Troubleshooting