2� Configuration
A. Launch the web browser on the PC..
B. Enter http://192.168.0.1/ advanced in the Address field (192..168..0..1 is the default local IP address of the Gateway).. Then press Enter..
C. If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen.. Proceed to step D..
If your ITSP supplied a password, you will see a login screen.. In the User Name field, enter user, which is the default user name for user access (this cannot be changed).. Then enter the password supplied by your ITSP.
D. The Router - Status screen will appear.. Click the WAN Setup tab..
E. Proceed to the appropriate instructions for your Internet Connection Type: DHCP, Static IP, or PPPoE..
DHCP
1. Select DHCP for the Connection Type..
2. If you use a cable modem, you may need to configure the MAC Clone Settings.. (Contact your ISP for more information..) Enable MAC Clone Service..
If your service uses a specific PC MAC address, then select yes from the Enable MAC Clone
Login screen
Router - Status Screen
Enable MAC Clone Service