Interactive Voice Response Menu
Action
Command
Choices
Description
|
|
| Use this command to enter |
|
|
| the Interactive Voice Response |
Enter Interactive |
|
| Menu.. Do not press any other |
|
| keys until you hear, “Linksys | |
Voice Response | **** |
| |
| configuration menu.. Please | ||
Menu |
|
| |
|
| enter the option followed by | |
|
|
| |
|
|
| the # (pound) key or hang up |
|
|
| to exit..” |
Check Internet | 100 |
| Check static or dynamic IP |
Connection Type |
| .ddress assignment. | |
|
| ||
Set Internet | 101 | DHCP - 0 | Select the type of Internet |
Connection Type |
| .tatic IP - 1 | connection you are using.. Refer |
|
| PPPoE - 2 | to the documentation supplied |
|
| PPPoe, DHCP - 3 | by your Internet Service |
|
| DHCP, PPPoE - 4 | Provider (ISP) |
|
|
|
|
Check IP Address | 110 |
| Hear the IP address assigned |
(Ethernet Port) |
|
| to the Gateway’s Internet |
|
|
| (external) interface.. |
|
|
|
|
Set Static IP Address
111
First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the static IP address.. Use the * (star) key when entering a decimal point..
Check Network
Mask (or Subnet
Mask)
120
Hear the network or subnet mask assigned to the Gateway..
Set Network (or 121 Subnet) Mask
First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the network or subnet mask.. Use the * (star) key when entering a decimal point..
Check Gateway IP Address
130
Hear the IP address of the Gateway (usually the network router)..