Linksys SPA8000 manual Static IP

Page 7
Select Static IP for the Connection Type..

Service setting.. Then enter the

PC’s MAC address in the Cloned

MAC Address field..

3. Click Submit All Changes..

Static IP

1.

2.Static IP In the Static IP Settings section,

enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field

3. In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields..

4. Click Submit All Changes..

PPPoE (most DSL users)

1. Select PPPoE for the Connection Type..

2. Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field..

3. Click Submit All Changes

PPPoE

If the Gateway is pre-configured by your ITSP, then you do not need to change any of the default voice settings.. Refer to the documentation supplied by your service provider for more information..

If you want to change the settings for your Internet phone service, refer to the User Guide, which is available on the Linksys website at www..linksys..com..

If you want to configure network settings using the Interactive Voice Response Menu, refer to the next section..



Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Port Telephony Gateway Page Table of Contents Before You Begin ConnectEthernet Connection AUX Connection Power Plug Dhcp ConfigurationStatic IP Interactive Voice Response Menu Action Command Choices Description 161 First, set the Internet Enable/Disable 7932 FCC Statement Regulatory InformationPage Safety Notices Page Weee Information Dansk Danish Miljøinformation for kunder i EU Il prodotto Iegādājāties šo izstrādājumu Norsk Norwegian Miljøinformasjon for kunder i EU Page Warranty WarrantyWebsite Contact Information
Related manuals
Manual 24 pages 1.75 Kb