Linksys WPC100 manual Advanced Setup, Network Settings screen appears

Chapter 3

Advanced Configuration

WEP (Wired Equivalent Privacy)

If the network uses WEP encryption, then the WEP Key or Passphrase Needed for Connection screen appears.

WEP Security

Passphrase  Enter the Passphrase or WEP key.

The passphrase is case-sensitive and must be 16 or fewer alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (For non-Linksys wireless products, enter the WEP key manually.)

If you enter the network’s WEP key, enter the appropriate number of hexadecimal characters (“0” to “9” and “A” to “F”). For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128­‑bit encryption, enter exactly 26 hexadecimal characters.

To connect to the network, click Connect. To cancel the connection, click Cancel.

2. Click Finish.

Congratulations

Congratulations! The profile is

successfully configured.

Advanced Setup

If your network is not listed with the available networks, use Advanced Setup.

Available Wireless Networks

1.Click Advanced Setup on the Available Wireless Networks screen to set up the Adapter manually.

2.The Network Settings screen appears.

Wireless Network

If your network has a router or other DHCP server, select Obtain network settings automatically (DHCP).

If your network does not have a DHCP server or router, select Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, leave these fields blank.

––IP Address  This IP Address must be unique to your network.

––Subnet Mask  The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.

RangePlus Wireless Notebook Adapter 18