Linksys WMP110 Profiles, Profile Information, Create a New Profile, Available Wireless Networks

Page 15

Chapter 3

Advanced Configuration

Profiles

The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and wireless network names.

Profiles

Profile  This is the name of the profile.

Wireless Network Name   This is the SSID or unique name of the wireless network.

Profile Information

For each profile selected, the following are listed:

Wireless Mode  This is the mode of the wireless network currently in use.

Standard Channel  This is the channel used by your wireless network.

Security  This is the status of the wireless security.

Authentication  This is the authentication setting for the network.

IP Address  This is the method used by the network to assign IP addresses.

Connect   To connect to a wireless network using a specific profile, select the profile, and click Connect.

Wi-Fi Protected Setup  Click the Wi-Fi Protected Setup button to connect to a router that supports Wi-Fi Protected Setup. Refer to the “Wi-Fi Protected Setup” instructions in the “Status” section at the beginning of this chapter.

New  Click New to create a new profile. See the next section, “Create a New Profile,” for instructions.

Edit  Select the profile you want to change and click Edit.

Import  Click Import to import a profile that is saved in another location. Select the appropriate file, and click Open.

Export  Select the profile you want to save in a different location, and click Export. Direct Windows to the appropriate folder, and click Save.

Delete  Select the profile you want to delete and click Delete.

NOTE: If you want to export more than one profile, you must export them one at a time.

Create a New Profile

The next screen is the Available Wireless Networks screen.

Available Wireless Networks

This screen provides two options for setting up the Adapter.

Available Wireless Networks (For most users)  Use this option if you already have a network set up. The networks available to this Adapter are listed on this screen. You can choose one of these networks and click Connect to connect to it. Click Refresh to update the Available Wireless Networks list.

Advanced Setup  If your network is not listed on this screen, select Advanced Setup to set up the Adapter manually. This method is for advanced users only.

The setup for each option is described, step by step, under the appropriate heading on the following pages.

Available Wireless Networks

The available networks are listed in the table on the center of the screen byWireless Network Name. Select the wireless network you wish to connect to and click Connect. (If you do not see your network listed, click Refresh to bring the list up again.)

If the router does not support Wi-Fi Protected Setup, proceed to the section, “No Wi-Fi Protected Setup”. If the router supports Wi-Fi Protected Setup , proceed to the section, “Wi-Fi Protected Setup”.

RangePlus Wireless PCI Adapter

12

Image 15
Contents User Guide Copyright and Trademarks About This GuideIcon Descriptions Online ResourcesTable of Contents LED Chapter Product OverviewChapter Wireless Security Checklist General Network Security GuidelinesAdditional Security Tips Status Chapter Advanced ConfigurationHow to Access the Wireless Network Monitor Wi-Fi Protected SetupEnter the Adapter’s PIN Number Use the Push ButtonWireless Network Status Connect Wireless Network StatisticsNo Wi-Fi Protected Setup Wireless Security DisabledWireless Security Enabled WEP Wired Equivalent Privacy Use the Push Button Enter Key Manually Wireless Security DisabledWPA2 Wi-Fi Protected Access Create a New Profile Available Wireless NetworksProfiles Profile InformationNo Wi-Fi Protected Setup Wi-Fi Protected Setup Enter the Adapter’s PIN Number Enter Key Manually Congratulations! The profile is Successfully configured Network Settings screen appears Advanced SetupWEP WPA Personal WPA2 PersonalWPA Enterprise Peap WPA2 EnterpriseRadius Congratulations! The profile is Successfully configured Appendix a Troubleshooting Appendix B Windows Vista Configuration Windows Vista ConfigurationNew Wireless Connection Secured Network Network Settings Saved Windows XP Wireless Zero Configuration Appendix C Windows XP Wireless Zero ConfigurationYour computer is now connected to your Wireless network PCI Appendix D SpecificationsLimited Warranty Obtaining Warranty ServiceExclusions and Limitations Technical Support Industry Canada Statement Safety NoticesFCC Statement FCC Radiation Exposure StatementAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information