Linksys WMP110 No Wi-Fi Protected Setup, Wireless Security Disabled, Wireless Security Enabled

Chapter 3

Advanced Configuration

Security  This is the security method used by the network.

Wi-Fi Protected Setup  Click the Wi-Fi Protected Setup button to connect to a router that supports Wi-Fi Protected Setup. Refer to the “Wi-Fi Protected Setup” instructions in the “Status” section at the beginning of this chapter.

Refresh  Click Refresh to perform a new search for wireless devices.

Connect  To connect to one of the networks on the list, select the wireless network, and click Connect.

If the router does not support Wi-Fi Protected Setup, proceed to the section, “No Wi-Fi Protected Setup”. If the router supports Wi-Fi Protected Setup , proceed to the section, “Wi-Fi Protected Setup”.

No Wi-Fi Protected Setup

If the router does not use Wi-Fi Protected Setup, proceed to the appropriate section, “Wireless Security Disabled” or “Wireless Security Enabled”.

Wireless Security Disabled

If you connect to a network whose wireless security is disabled, then you will view this screen:

Click Connect Anyway

1.Click Connect Anyway.

2.Click Finish.

Congratulations

RangePlus Wireless PCI Adapter

Congratulations! The Adapter is connected to

the network.

Wireless Security Enabled

If you connect to a network whose wireless security is enabled, then you will view one of three screens.

1.Proceed to the appropriate instructions.

WPA2 (Wi-Fi Protected Access 2)

If the network uses WPA2 Personal security, then the WPA2-Personal Key Needed for Connection screen appears.

WPA2-Personal Security

Passphrase  Enter the network’s Passphrase (also called a pre-shared key) of 8-63 characters.

To connect to the network, click Connect. To cancel the connection, click Cancel.

WPA (Wi-Fi Protected Access)

If the network uses WPA Personal security, then the WPA-Personal Key Needed for Connection screen appears.

WPA-Personal Security