Chapter 3
Advanced Configuration
3. On the Adapter’s PIN number screen, click Next.
Enter the PIN Number
4. The Adapter connects to the network.
Connecting to the Network
5.Click Print to print out your wireless network settings. Then click Finish to return to the Status screen, or click Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.
Wireless Network Status
The Wireless Network Status screen provides information on your current network settings.
Wireless Network Status
Radio Band This is the radio band used on the network.
Wireless Network Name This is the unique name (SSID) of the wireless network.
Wireless Mode This is the mode of the wireless network currently in use.
Wide Channel This is the
Standard Channel This is the channel used by your wireless network.
Security This is the status of the wireless security feature.
Authentication This is your wireless network’s authentication method.
Network Type This is the wireless network type. IP Address This is the IP Address of the Adapter. Subnet Mask This is the Adapter’s Subnet Mask.
Default Gateway This is the Default Gateway address. DNS1 This is the DNS address of the Adapter.
MAC Address This is the MAC address of the wireless network’s wireless router or access point.
Signal Strength The Signal Strength bar indicates the signal strength.
Link Quality The Link Quality bar indicates the quality of the wireless network connection.
Statistics Click Statistics to go to the Wireless Network
Statistics screen.
RangePlus Wireless PCI Adapter |