Wireless-G Game Adapter
The Game Adapter’s Side Panel
The Game Adapter’s mode switch, Reset button, and ports are located on the side panel of the Game Adapter.
Figure 3-2: Side Panel
Switch The switch is used to set the Game Adapter’s mode. The switch allows you to set the Game Adapter to Ad-hoc or Infrastructure mode. If you will run the Setup Wizard or connect the Game Adapter directly to your Xbox, then set the switch to the Infrastructure position. If you will follow the “Fast Setup” instructions, then set the switch to the Adhoc position.
Reset The Reset button is used to reset the Game Adapter to its factory default settings. To restore the factory defaults, press this button for approximately five seconds.
Network The Network port is where you will connect the Ethernet network cable to your computer for setup or your game console for gaming.
Power The Power port is where you will connect the included power adapter.
Chapter 3: Getting to Know the | 7 |
The Game Adapter’s Side Panel