Linksys WGA54G manual WEP Encryption

Wireless-G Game Adapter

To connect to one of these networks, select a network and then click the Connect button. If you want to update this list of wireless networks, click the Refresh button.

When you have finished making changes, click the Apply button to save your changes, or click the Cancel button to undo your changes. For help information, click Help.

WEP Encryption

Use the WEP Encryption screen to change the Game Adapter’s wireless security settings.

Default Transmit Key - The default transmit key number is 1. If your network’s access point uses transmit key number 2, 3, or 4, select the appropriate radio button.

WEP Encryption- Select the level of WEP encryption, 64Bit (10 hex digits) or 128Bit (26 hex digits), from the drop-down menu.

Passphrase - To automatically generate one or more WEP keys, enter a passphrase in the Passphrase field and click the Generate button. The passphrase is case-sensitive and should not have more than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.)

Key 1-4 - If you want to manually enter the WEP key, enter it in the appropriate field. The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

When you have finished making changes, click the Apply button to save your changes, or click the Cancel button to undo your changes. For help information, click Help.

Chapter 7: Using the Wireless-G Game Adapter Web Configuration Utility

Figure 7-3: Utility’s WEP Encryption Screen

31

The Setup Tab