Linksys Linksys AM300 Quick Configuration, Page 2 of, In the Internet Explorer screen, Click

Page 2
In the Internet Explorer screen

Linksys AM300 Quick Configuration

In the Internet Explorer screen

 

complete the following steps:

1

 

1 In the Address field enter : Ethernet:/USB = 192.168.1.1

Note: USB drivers must be installed first before proceeding with this userguide.

2 Click complete the following steps:.

2

Page 2 of 7

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Troubleshooting Linksys AM300 Quick ConfigurationWhy is this task performed? What tools are used to complete the task?complete the following steps Page 2 ofIn the Internet Explorer screen 1 In the Address field enter Ethernet/USB =Page 3 of 1 In the Username field enter admin2 In the Password field enter admin 3 Click In the Log In screen, complete the following stepsPage 4 of 1 From the Timezone drop down Scroll down the Setup screen, complete the following stepsPage 5 of menu select the time zone applicable to the state you are in 2 Click1 Allow up to 25 seconds for the previous page to load In the Settings are successful screen, complete the following stepPage 6 of Page 7 of
Top Page Image Contents