Linksys AM300 Quick Configuration
In the Setup screen, complete the following steps:
1 From the Encapsulation drop down menu select RFC 2364 PPPoA.
Note: The page will refresh to include the PPPoA section.
2 Ensure the VPI is set at 8 and the VCI is set at 35 from the Virtual Circuit ID: field.
3 Select the VC radio button from the Multiplexing field.
4 From the DSL Modulation: field select Auto.
5 Enter the username in the Username field.
Refer to the Settings Page on our website for the username format.
6 Enter the password in the Password field.
Refer to the Settings Page on our website for the password format.
1
2
3
4
5
6