Configuration Commands
HTTPS Access configuration
The following table describes the HTTPS Access Configuration commands.
Table 96 HTTPS Access Configuration commands
CommandDescription
[no] access https enable
access https port <TCP port number>
access https generate- certificate
Enables or disables BBI access (Web access) using HTTPS. The default value is disabled.
Command mode: Global configuration
Defines the HTTPS Web server port number.
Command mode: Global configuration
Allows you to generate a certificate to connect to the SSL to be used during the key exchange. A default certificate is created when HTTPS is enabled for the first time. The user can create a new certificate defining the information that they want to be used in the various fields. For example:
•Country Name (2 letter code) [ ]: CA
•State or Province Name (full name) [ ]: Ontario
•Locality Name (for example, city) [ ]: Ottawa
•Organization Name (for example, company) [ ]:
•Organizational Unit Name (for example, section) [ ]: ProLiant
•Common Name (for example, user’s name) [ ]: Mr Smith
•Email (for example, email address) [ ]: info@hp.com
access https save- certificate
show access
You must confirm if you want to generate the certificate. It takes approximately 30 seconds to generate the certificate. Then the switch restarts SSL agent.
Command mode: Global configuration
Allows the client, or the Web browser, to accept the certificate and save the certificate to Flash to be used when the switch is rebooted.
Command mode: Global configuration
Displays the current SSL Web Access configuration.
Command mode: All except User EXEC
122
