HP 445942-001 manual Operations-level port options, Number shutdown

Operations Commands

Operations Commands

Introduction

Operations-level commands are used for making immediate and temporary changes to switch configuration. Operations commands are used for bringing ports temporarily in and out of service. These commands are available only from an administrator and operator login.

The following table describes basic Operations commands. The following sections provide more detailed information and commands.

Table 176 Operations commands

Command	Description
password	Allows the user to change the password. You need to enter the current
	password in use for validation.
clear logging	Clears all Syslog messages.
	Command Mode: Priv EXEC
ntp send	Allows the user to send requests to the NTP server.
	Command Mode: Priv EXEC

Operations-level port options

Operations-level port options are used for temporarily disabling or enabling a port.

Table 177 Operations-Level Port commands

Command	Description
[no] rmon	Enables or disables Remote Monitoring for the port. RMON must be
	enabled for any RMON configurations to function.
	Command mode: Interface port
no interface port <port	Temporarily enables the port. The port will be returned to its configured
number> shutdown	operation mode when the switch is reloaded.
	NOTE: This command does not enable a port that has been disabled by an
	ekeying mismatch error.
	Command Mode: Priv EXEC
interface port <port	Temporarily disables the port. The port will be returned to its configured
number> shutdown	operation mode when the switch is reloaded.
	Command Mode: Priv EXEC
show interface port <port	Displays the current settings for the port.
number> operation	Command Mode: Priv EXEC

186