HP 445942-001 manual Secure Shell Server configuration, Ssh port TCP port number

Configuration Commands

Secure Shell Server configuration

Telnet traffic on the network is not secure. These commands enable Secure Shell (SSH) access from any SSH client. The SSH program securely logs into another computer over a network and executes commands in a secure environment. All data using SSH is encrypted.

NOTE: See the HP 10Gb Ethernet BL-c Switch Application Guide for information on SSH.

The following table describes the SSHD Configuration commands.

Table 78 SSHD Configuration commands

Command	Description
ssh interval <0-24>	Defines interval for auto-generating the RSA server key. The switch will
	auto-generate the RSA server key at the interval defined in this command.
	The range is 0-24 hours.
	The value of zero (0) means the RSA server key auto-generation is
	disabled. If the switch has been busy performing any other key generation
	and the assigned time of interval expires, the RSA server will skip
	generating the key.
	Command mode: Global configuration
ssh scp-password	Defines the administrator password that is for Secure Copy (SCP) only.
	The username for this SCP administrator is scpadmin.
	Typically, SCP is used to copy files securely from one machine to another.
	In the switch, SCP is used to download and upload the switch
	configuration using secure channels.
	Command mode: Global configuration
ssh generate-host-key	Generates the RSA host keys manually. The switch creates this key
	automatically while configuring the switch with Secure Shell (SSH). But
	you can generate the key manually by using this command if you need to
	overwrite the key for security reasons. The command will take effect
	immediately.
	Command mode: Global configuration
ssh generate-server-key	Generates the RSA server key. The switch creates this key automatically
	while configuring the switch with Secure Shell (SSH). You can generate
	the key manually by using this command if you need to overwrite the key
	for security reasons. The command will take effect immediately.
	Command mode: Global configuration
ssh port <TCP port number>	Sets the SSH server port number.
	Command mode: Global configuration
ssh scp-enable	Enables the SCP apply and save.
	Command mode: Global configuration
no ssh scp-enable	Disables the SCP apply and save. This is the default for SCP.
	Command mode: Global configuration
ssh enable	Enables the SSH server.
	Command mode: Global configuration

105