HP 445942-001 manual 115

	Configuration Commands
Table 86 View-based Access Control Configuration commands
Command	Description
snmp-server access <1-32> level	Defines the minimum level of security required to gain access rights.
{noAuthNoPrivauthNo-	The level noAuthNoPriv means that the SNMP message will be
PrivauthPriv}	sent without authentication and without using a privacy protocol.
	The level authNoPriv means that the SNMP message will be sent
	with authentication but without using a privacy protocol. The
	authPriv means that the SNMP message will be sent both with
	authentication and using a privacy protocol.
	Command mode: Global configuration
snmp-server access <1-32> read-	Defines a 32 character long read view name that allows you read
view <1-32 characters>	access to a particular MIB view. If the value is empty or if there is no
	active MIB view having this value then no access is granted.
	Command mode: Global configuration
snmp-server access <1-32> write-	Defines a 32 character long write view name that allows you write
view <1-32 characters>	access to the MIB view. If the value is empty or if there is no active
	MIB view having this value then no access is granted.
	Command mode: Global configuration
snmp-server access <1-32> notify-	Defines a 32 character long notify view name that allows you notify
view <1-32 characters>	access to the MIB view.
	Command mode: Global configuration
no snmp-server access <1-32>	Deletes the View-based Access Control entry.
	Command mode: Global configuration
show snmp-server access <1-32>	Displays the View-based Access Control configuration.
	Command mode: All

SNMPv3 Group configuration

The following table describes the SNMPv3 Group Configuration commands.

Table 87 SNMPv3 Group Configuration commands

Command	Description
snmp-server group <1-16>	Defines the security model.
security {usmsnmpv1snmpv2}	Command mode: Global configuration
snmp-server group <1-16>	Sets the user name. The user name can have a maximum of
user-name<1-32 characters>	32 characters.
	Command mode: Global configuration
snmp-server group <1-16>	The name for the access group. The group name can have a maximum of
group-name<1-32 characters>	32 characters.
	Command mode: Global configuration
no snmp-server group <1-16>	Deletes the vacmSecurityToGroup entry.
	Command mode: Global configuration

115