
Information Commands
Routing Information Protocol
The following table describes the Routing Information Protocol (RIP) information commands. Table 35 RIP information commands
Command |
| Usage |
|
|
|
show ip rip routes |
| Displays RIP routes. |
|
| Command mode: All except User EXEC |
|
| Displays RIP interface information. |
show ip rip interface |
| |
|
| Command mode: All except User EXEC |
|
| Displays RIP user’s configuration. |
show interface ip rip |
| |
|
| Command mode: All |
|
|
|
RIP Routes information
The following command displays RIP route information:
show ip rip routes
Command mode: All except User EXEC
3.0.0.0/8 via 30.1.1.11 metric 4 4.0.0.0/16 via 30.1.1.11 metric 16 10.0.0.0/8 via 30.1.1.2 metric 3 20.0.0.0/8 via 30.1.1.2 metric 2
This table contains all dynamic routes learned through RIP, including the routes that are undergoing garbage collection with metric = 16. This table does not contain directly connected routes and locally configured static routes.
RIP user configuration
The following command displays RIP user information:
show interface ip [<1-250>] rip Command mode: All
RIP USER CONFIGURATION :
RIP on update 30
RIP Interface 2 : 102.1.1.1, enabled
version 2, listen enabled, supply enabled, default none poison disabled, trigg enabled, mcast enabled, metric 1 auth none, key none
RIP Interface 3 : 103.1.1.1, enabled
version 2, listen enabled, supply enabled, default none poison disabled, trigg enabled, mcast enabled, metric 1
53