HP 445942-001 SNMPv3 Community Table configuration, SNMPv3 Target Address Table configuration

Configuration Commands

Table 87 SNMPv3 Group Configuration commands

CommandDescription

show snmp-server group <1-16>Displays the current vacmSecurityToGroup configuration.

Command mode: All

SNMPv3 Community Table configuration

These commands are used for configuring the community table entry. The configured entry is stored in the community table list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore (LCD) of SNMP engine.

The following table describes the SNMPv3 Community Table Configuration commands. Table 88 SNMPv3 Community Table Configuration commands

Command	Description
snmp-server community <1-16>	Configures the unique index value of a row in this table. The index can
index <1-32 characters>	have a maximum of 32 characters.
	Command mode: Global configuration
snmp-server community <1-16>	Defines the name, up to 32 characters.
name <1-32 characters>	Command mode: Global configuration
snmp-server community <1-16>	Defines a readable 32 character string that represents the corresponding
user-name<1-32 characters>	value of an SNMP community name in a security model.
	Command mode: Global configuration
snmp-server community <1-16>	Configures a tag of up to 255 characters maximum. This tag specifies a
tag <1-255 characters>	set of transport endpoints to which a command responder application
	sends an SNMP trap.
	Command mode: Global configuration
no snmp-server community	Deletes the community table entry.
<1-16>	Command mode: Global configuration
show snmp-server community	Displays the community table configuration.
<1-16>	Command mode: All

SNMPv3 Target Address Table configuration

These commands allow you to set passwords and display current user statistics. Passwords can be a maximum of 15 characters. To disable a user, set the password to null.

The following table describes the SNMPv3 Target Address Table Configuration commands. Table 89 SNMPv3 Target Address Table Configuration commands

Command

snmp-server target-address <1-16> address <IP address> name <1-32

characters>

Description

Configures the locally arbitrary, but unique identifier, target address name associated with this entry.

Command mode: Global configuration

116