HP 445942-001 manual Show all IP Route information, Show ip route

Information Commands

Route information

Using the commands listed below, you can display all or a portion of the IP routes currently held in the switch.

Table 28 Route Information commands

Command	Usage
	Displays a single route by destination IP address.
show ip route address <IP address>
	Command mode: All except User EXEC
show ip route gateway <IP address>	Displays routes to a single gateway.
	Command mode: All except User EXEC
show ip route type	Displays routes of a single type.
{indirectdirectlocalbroadcastmartian	Command mode: All except User EXEC
multicast}
show ip route tag	Displays routes of a single tag.
{fixedstaticaddrripospfbroadcast	Command mode: All except User EXEC
multicastmartian}
show ip route interface <1-250>	Displays routes on a single interface.
	Command mode: All except User EXEC
show ip route	Displays all routes configured in the switch.
	Command mode: All except User EXEC

Show all IP Route information

The following command displays IP route information:

show ip route

Command mode: All except User EXEC

Status code: * -	best
Destination	Mask	Gateway	Type	Tag	Metr	If
---------------	---------------	---------------	---------	--------- ----		--
* 11.0.0.0	255.0.0.0	11.0.0.1	direct	fixed		211
* 11.0.0.1	255.255.255.255	11.0.0.1	local	addr		211
* 11.255.255.255	255.255.255.255	11.255.255.255	broadcast	broadcast		211
* 12.0.0.0	255.0.0.0	12.0.0.1	direct	fixed		12
* 12.0.0.1	255.255.255.255	12.0.0.1	local	addr		12
* 12.255.255.255	255.255.255.255	12.255.255.255	broadcast	broadcast		12
* 13.0.0.0	255.0.0.0	11.0.0.2	indirect	ospf	2	211
* 47.0.0.0	255.0.0.0	47.133.88.1	indirect	static		24
* 47.133.88.0	255.255.255.0	47.133.88.46	direct	fixed		24
* 172.30.52.223	255.255.255.255	172.30.52.223	broadcast	broadcast 2
* 224.0.0.0	224.0.0.0	0.0.0.0	martian	martian
* 224.0.0.5	255.255.255.255	0.0.0.0	multicast	addr

46