
Configuration Commands
ACL Packet Format configuration
The following table describes the Packet Format Configuration commands.
Table 159 Packet Format Configuration commands
Command | Description | |
|
| |
Defines the Ethernet format for the ACL. | ||
Command mode: Global configuration | ||
{ethertype2snapllc} | ||
| ||
|
| |
[no] | Defines the tagging format for the ACL. | |
Command mode: Global configuration | ||
| ||
|
| |
default | Resets Packet Format parameters for the ACL to their default values. | |
Command mode: Global configuration | ||
| ||
|
| |
show | Displays the current Packet Format parameters for the ACL. | |
Command mode: All except User EXEC | ||
| ||
|
|
ACL Metering configuration
The following table describes the ACL Metering Configuration commands.
Table 160 ACL Metering Configuration commands
Command | Description |
|
|
Configures the committed rate, in Kilobits per second. The committed rate | |
meter | must be a multiple of 1,000. |
| Command mode: Global configuration |
| |
|
|
Configures the maximum burst size, in Kilobits. Enter one of the following | |
meter | values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096 |
| Command mode: Global configuration |
| |
|
|
[no] | Enables or disables Metering on the ACL. |
Command mode: Global configuration | |
| |
|
|
Configures the ACL Meter to either drop or pass | |
meter action {droppass} | Command mode: Global configuration |
| |
|
|
default | Reset ACL Metering parameters to their default values. |
Command mode: Global configuration | |
| |
|
|
show | Displays the current ACL metering parameters. |
Command mode: All except User EXEC | |
| |
|
|
174