HP 445942-001 manual ACL Re-mark configuration, ACL Re-mark In-Profile configuration

Configuration Commands

ACL Re-mark configuration

You can choose to re-mark IP header data for the selected ACL. You can configure different re-mark values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.

The following table describes the ACL Re-mark Configuration commands. Table 161 ACL Re-mark Configuration commands

Command	Description
[no] access-control list <1-384>	Assign an ACL for DSCP Re-marking.
re-mark	Command mode: Global configuration
default access-control list <1-384>	Reset ACL Re-mark parameters to their default values.
re-mark	Command mode: Global configuration
show access-control list <1-384>	Displays the current ACL re-mark parameters.
re-mark	Command mode: All except User EXEC

ACL Re-mark In-Profile configuration

The following table describes the ACL Re-mark In-Profile Configuration commands.

Table 162 ACL Re-mark In-Profile Configuration commands

Command	Description
access-control list <1-384>	Sets the DiffServ Code Point (DSCP) of In-Profile packets to the
re-mark in-profile dscp <0-63>	selected value.
	Command mode: Global configuration
default access-control list	Resets the update DSCP parameters to their default values.
<1-384> re-mark	Command mode: Global configuration
show access-control list <1-384>	Displays the current ACL re-mark parameters.
re-mark	Command mode: All except User EXEC

175