HP 445942-001 manual ACL Port configuration, No flowcontrol, No auto, No access-control list

Configuration Commands

Table 98 Gigabit Link Configuration commands

Command	Description
no flowcontrol	Sets the flow control to none.
	Command mode: Interface port
	Enables or disables auto-negotiation for the port.
[no] auto

show interface port {<port number>}

All downlink and uplink ports are fixed at 10000 Mbps, and cannot be set to auto-negotiate.

Command mode: Interface port

Displays current port parameters.

Command mode: All

ACL Port configuration

The following table describes the basic Access Control List Configuration commands for the port. Table 99 ACL Port Configuration commands

Command	Description
[no] access-control list <1-384>	Adds or removes the specified ACL.
	Command mode: Interface port

[no] access-control group <1-384>

show interface port [<port number>] access-control

Adds or removes the specified ACL Group. Command mode: Interface port

Displays current ACL QoS parameters. Command mode: All

125