HP 445942-001 manual Ospf Host Entry configuration, Ospf Route Redistribution configuration

Configuration Commands

OSPF Host Entry configuration

The following table describes the OSPF Host Entry Configuration commands.

Table 136 OSPF Host Entry Configuration commands

Command	Description
	Configures the base IP address for the host entry.
host <1-128> address <IP address>
	Command mode: Router OSPF
host <1-128> area <0-2>	Configures the area index of the host.
	Command mode: Router OSPF
host <1-128> cost <1-65535>	Configures the cost value of the host.
	Command mode: Router OSPF
host <1-128> enable	Enables OSPF host entry.
	Command mode: Router OSPF
no host <1-128> enable	Disables OSPF host entry.
	Command mode: Router OSPF
no host <1-128>	Deletes OSPF host entry.
	Command mode: Router OSPF
show ip ospf host {<1-128>}	Displays the current OSPF host entries.
	Command mode: All except User EXEC

OSPF Route Redistribution configuration

The following table describes the OSPF Route Redistribution Configuration commands.

Table 137 OSPF Route Redistribution Configuration commands

Command	Description
redistribute {fixedstaticrip}	Adds selected routing maps to the rmap list.
{<1-32>}	This option adds a route map to the route redistribution list. The
	routes of the redistribution protocol matched by the route maps
	in the route redistribution list will be redistributed.
	Command mode: Router OSPF
no redistribute {fixedstaticrip}	Removes the route map from the route redistribution list.
{<1-32>}	Removes routing maps from the rmap list.
	Command mode: Router OSPF
[no] redistribute {fixedstaticrip}	Exports the routes of this protocol as external OSPF AS-external
export metric <1-16777214> metric-	LSAs in which the metric and metric type are specified.
type {type1type2}	Command mode: Router OSPF
show ip ospf redistribute	Displays the current route map settings.
	Command mode: All except User EXEC

156