Statistics Commands
UDP statistics
The following command displays UDP statistics:
show ip udp counters
Command mode: All except User EXEC
UDP statistics:
udpInDatagrams: 54 udpOutDatagrams: 43
udpInErrors:0 udpNoPorts: 1578077
The following table describes the User Datagram Protocol (UDP) statistics:
Table 61 UDP statistics
Statistics | Description |
|
|
udpInDatagrams | The total number of UDP datagrams delivered to the switch. |
|
|
udpOutDatagrams | The total number of UDP datagrams sent from this switch. |
|
|
udpInErrors | The number of received UDP datagrams that could not be delivered for reasons other |
| than the lack of an application at the destination port. |
|
|
udpNoPorts | The total number of received UDP datagrams for which there was no application at the |
| destination port. |
|
|
IGMP Multicast Group statistics
The following command displays statistics about the use of the IGMP Multicast Groups:
show ip igmp counters Command mode: All except User EXEC
IGMP Snoop vlan 1 statistics:
rxIgmpValidPkts: | 0 | rxIgmpInvalidPkts: | 0 |
rxIgmpGenQueries: | 0 | rxIgmpGrpSpecificQueries: | 0 |
rxIgmpGroupSrcSpecificQueries: | 0 |
|
|
rxIgmpLeaves: | 0 | rxIgmpReports: | 0 |
txIgmpReports: | 0 | txIgmpGrpSpecificQueries: | 0 |
txIgmpLeaves: | 0 | rxIgmpV3CurrentStateRecords: | 0 |
rxIgmpV3SourceListChangeRecords: | 0 | rxIgmpV3FilterChangeRecords: | 0 |
These commands enable you to display statistics regarding the use of the IGMP Multicast Groups. The following table describes the IGMP statistics:
Table 62 IGMP statistics
Statistic | Description |
|
|
rxIgmpValidPkts | Total number of valid IGMP packets received |
|
|
rxIgmpInvalidPkts | Total number of invalid packets received |
|
|
rxIgmpGenQueries | Total number of General Membership Query packets received |
|
|
86