![](/images/new-backgrounds/1319497/31949743x1.webp)
Information Commands
SNMPv3 USM User Table information
The following command displays SNMPv3 user information:
show
Command mode: All
The
•the user name
•a security name in the form of a string whose format is independent of the Security Model
•an authentication protocol, which is an indication that the messages sent on behalf of the user can be authenticated
•the privacy protocol.
The following table describes the SNMPv3 User Table information.
Table 9 User Table parameters
Field |
| Description |
|
|
|
User Name |
| This is a string that represents the name of the user that you can use to access the switch. |
|
| This indicates whether messages sent on behalf of this user are protected from disclosure |
Protocol |
| |
|
| using a privacy protocol. Switch software supports DES algorithm for privacy. The |
|
| software also supports two authentication algorithms: MD5 and |
|
|
|
SNMPv3 View Table information
The following command displays the SNMPv3 View Table:
show snmp-server v3 view Command mode: All
View Name | Subtree | Mask | Type |
iso | 1 |
| included |
v1v2only | 1 |
| included |
v1v2only | 1.3.6.1.6.3.15 |
| excluded |
v1v2only | 1.3.6.1.6.3.16 |
| excluded |
v1v2only | 1.3.6.1.6.3.18 |
| excluded |
The user can control and restrict the access allowed to a group to only a subset of the management information in the management domain that the group can access within each context by specifying the group’s rights in terms of a particular MIB view for security reasons.
22