Configuration Commands

VRRP Interface configuration

These commands are used for configuring VRRP authentication parameters for the IP interfaces used with the virtual routers. The interface number represents the IP interface on which authentication parameters must be configured.

The following table describes the VRRP Interface Configuration commands. Table 152 VRRP Interface Configuration commands

CommandDescription

interface <1-249> authentication {passwordnone}

interface <1-249> password <password>

no interface <1-249>

show ip vrrp interface <1-249>

Defines the type of authentication that will be used: none (no authentication), or password (password authentication).

Command mode: Router VRRP

Defines a plain text password up to eight characters long. This password will be added to each VRRP packet transmitted by this interface when password authentication is chosen.

Command mode: Router VRRP

Clears the authentication configuration parameters for this IP interface. The IP interface itself is not deleted.

Command mode: Router VRRP

Displays the current configuration for this IP interface’s authentication parameters. Command mode: All except User EXEC

VRRP Tracking configuration

These commands are used for setting weights for the various criteria used to modify priority levels during the master router election process. Each time one of the tracking criteria is met, the priority level for the virtual router is increased.

The following table describes the VRRP Tracking Configuration commands. Table 153 VRRP Tracking Configuration commands

Command

Description

 

 

tracking-priority-increment

Defines the priority increment value (0 through 254) for virtual routers in

virtual-routers <0-254>

master mode detected on this switch. The default value is 2.

 

Command mode: Router VRRP

 

 

tracking-priority-increment

Defines the priority increment value (0 through 254) for active IP

interfaces <0-254>

interfaces detected on this switch. The default value is 2.

 

Command mode: Router VRRP

 

 

tracking-priority-increment

Defines the priority increment value (0 through 254) for active ports on the

ports <0-254>

virtual router’s VLAN. The default value is 2.

 

Command mode: Router VRRP

 

 

show ip vrrp tracking-

Displays the current configuration of priority tracking increment values.

priority-increment

Command mode: All except User EXEC

 

 

 

168

Page 168
Image 168
HP 445942-001 manual Vrrp Interface configuration, Vrrp Tracking configuration