![](/images/new-backgrounds/1319497/319497125x1.webp)
Information Commands
Link status information
The following command displays link information:
show interface link
Command mode: All except User EXEC
Port | Speed | Duplex | Flow Ctrl | Link | |
1 | 10000 | full | yes | yes | down |
2 | 10000 | full | yes | yes | down |
3 | 10000 | full | yes | yes | down |
4 | 10000 | full | yes | yes | down |
5 | 10000 | full | yes | yes | down |
6 | 10000 | full | yes | yes | down |
7 | 10000 | full | yes | yes | down |
8 | 10000 | full | yes | yes | down |
9 | 10000 | full | yes | yes | up |
10 | 10000 | full | yes | yes | down |
11 | 10000 | full | yes | yes | down |
12 | 10000 | full | yes | yes | down |
13 | 10000 | full | yes | yes | down |
14 | 10000 | full | yes | yes | down |
15 | 10000 | full | yes | yes | down |
16 | 10000 | full | yes | yes | down |
17 | 100 | full | yes | yes | up |
18 | 10000 | full | yes | yes | down |
19 | 10000 | full | yes | yes | down |
20 | 10000 | full | yes | yes | down |
21 | 10000 | full | yes | yes | down |
Use this command to display link status information about each port on a switch, including:
•Port number
•Port speed (10000 Mb/s or 100 Mb/s)
•Duplex mode (half, full, or any)
•Flow control for transmit and receive (no, yes, or any)
•Link status (up, down, or disabled)
63