HP 445942-001 manual Layer 3 configuration, IP interface configuration, Ip address IP address IP

Configuration Commands

Layer 3 configuration

The following table describes basic Layer 3 Configuration commands. The following sections provide more detailed information and commands.

Table 118 L3 Configuration commands

Command	Description
interface ip {<1-250>}	Enter IP Interface mode.
	Command mode: Global configuration
route-map <1-32>	Enter IP Route Map mode.
	Command mode: Global configuration
router rip	Enter Router RIP mode.
	Command mode: Global configuration
router ospf	Enter Router OSPF mode.
	Command mode: Global configuration
router vrrp	Enter VRRP configuration mode.
	Command mode: Global configuration
ip router-id <IP address>	Sets the router ID.
	Command mode: Global configuration
show layer3	Displays the current IP configuration.
	Command mode: All except User EXEC

IP interface configuration

The switch can be configured with up to 250 IP interfaces. Each IP interface represents the switch on an IP subnet on your network. The IP Interface option is disabled by default.

The following table describes the IP Interface Configuration commands. Table 119 IP Interface Configuration commands

Command	Description
interface ip {<1-250>}	Enter IP interface mode.
	Command mode: Global configuration
ip address {<IP address>}{<IP	Configures the IP address and mask of the switch interface using dotted
netmask>}	decimal notation.
	Command mode: Interface IP
vlan {<1-4094>}	Configures the VLAN number for this interface. Each interface can
	belong to one VLAN, though any VLAN can have multiple IP interfaces
	in it.
	Command mode: Interface IP
[no] relay	Enables or disables the BOOTP relay on this interface. The default value
	is enabled.
	Command mode: Interface IP
enable	Enables this IP interface.
	Command mode: Interface IP
	142