HP 445942-001 manual System Information commands, Show information-dump, Show snmp-server

	Information Commands
Table 6 Information commands
Command	Usage
show information-dump	Dumps all switch information available (10K or more, depending on your
	configuration).
	If you want to capture dump data to a file, set your communication software
	on your workstation to capture session data prior to issuing the dump
	commands.
	Command mode: All

System Information commands

The following table describes the System Information commands.

Table 7 System Information commands

Command	Usage
show snmp-server v3	Displays SNMP v3 information.
	Command mode: All
	Displays system information, including:
show sys-info
	System date and time
	Switch model name and number
	Switch name and location
	Time of last boot
	MAC address of the switch management processor
	IP address of IP interface #1
	Hardware version and part number
	Software image file and version number
	Configuration name
	Log-in banner, if one is configured
	Command mode: All
	Displays most recent syslog messages.
show logging messages
	Command mode: All
	Displays User Access information.
show access user
	Command mode: All except User EXEC

20