
Statistics Commands
UDP statistics
The following command displays UDP statistics:
show mp udp-block
Command mode: All except User EXEC
All UDP allocated control blocks:
161:listen
The following table describes the User Datagram Protocol (UDP) control block (UCB) statistics shown in this example:
Table 70 UDP statistics
Description | Example Statistic |
|
|
Control block | 161 |
|
|
State | listen |
|
|
CPU statistics
The following command displays the CPU utilization statistics:
show mp cpu
Command mode: All except User EXEC
CPU utilization:
cpuUtil1Second:8%
cpuUtil4Seconds:9%
cpuUtil64Seconds: 8%
The following table describes the management port CPU utilization statistics:
Table 71 CPU statistics
Statistics |
| Description |
|
| The utilization of MP CPU over 1 second. This is shown as a percentage. |
cpuUtil1Second |
| |
|
|
|
cpuUtil4Seconds |
| The utilization of MP CPU over 4 seconds. This is shown as a percentage. |
|
|
|
cpuUtil64Seconds |
| The utilization of MP CPU over 64 seconds. This is shown as a percentage. |
|
|
|
ACL statistics
The following command displays the statistics for Access Control Lists (ACLs):
show access-control counters
Command mode: All except User EXEC
Hits for ACL 1: 26057515
Hits for ACL 2: 26057497
95