Information Commands
IP information
The following command displays Layer 3 information:
show layer3 information Command mode: All
IP information: |
|
|
| |
Interface information: |
|
| ||
1: 10.80.23.243 | 255.255.254.0 | 10.80.23.255, | vlan 1, up | |
250: 10.20.7.144 | 255.255.0.0 | 10.20.255.255, | vlan 4095, up | |
Default gateway information: metric strict |
| |||
1: 10.80.22.1, | vlan any, up | active |
| |
254: 10.20.1.1, | vlan 4095, up | active |
| |
Current BOOTP relay settings: OFF |
|
| ||
0.0.0.0, | 0.0.0.0 |
|
|
|
Current IP forwarding settings: OFF, dirbr disabled
Current network filter settings: none
Current route map settings:
The following interface and default gateway information is displayed:
•Interface number
•IP address
•IP mask
•IP broadcast address
•Operational status
54
